If you want more than 150m, please contact us first
-
British Army Antenna Wire with Kevlar Core THIS IS PURCHASED BY THE METRE eg 10 = 10 metres
-
EzyClamps are made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won't crack the pole and can be tightened fully.
- Screw Type – 8mm Hex
- Max Torque – 2.0Nm
- Band Width – 12.7mm – 0.50inch
- Operating Temperature – Max Long term Temp 125°C (255°F) – Occasional Peak Temp 150°C (302°F)
- PA66 (Nylon 6.6.)
-
EzyClamps are made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won't crack the pole and can be tightened fully.
- Screw Type – 8mm Hex
- Max Torque – 2.0Nm
- Band Width – 12.7mm – 0.50inch
- Operating Temperature – Max Long term Temp 125°C (255°F) – Occasional Peak Temp 150°C (302°F)
- PA66 (Nylon 6.6.)
-
This is an imaginary product in case you need to drop us a few pennies for something
-
Buy 4 and receive a 4m length (as supplied in a standard DX Commander kit)
- Polyester cover is tough and UV resistant offering good abrasion resistance
- Construction: Parallel Natural Rubber Threads
- Cover: 24 Plait Polyester
-
These are DX Commander's extra large version of the EzyClamps, made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won’t crack the pole and can be tightened fully.
-
The ultimate no-tangle DX10 Antenna Wire as supplied in all kits for DX Commander.
-
In Stock and Shipping Now
The Signature 9 builds on the success of both the Classic and the Signature 12.4, creating a new heavy-duty free-standing guyless DX Commander. -
Vertical Antenna Biodegradable Radial Pin Kit - Pins Radials down to soft ground fast and safe
-
Original, Brand New 10m DX Commander Classic Telescopic Pole with protective shipping plastic bag
-
DX Commander Expedition Portable Ham Radio Antenna 40m - 6m NO ATU
-
Sale!
DX Commander CLASSIC – HF Multi-Band Vertical System
Now with the full EzyClamp stay up kit AND the GREY marine Spreaders (not white)
-
DX Commander CLASSIC – HF Multi-Band Vertical System
-
Brand New DX Commander Expedition Telescopic Pole
-
Out of stockDX Commander CLASSIC – HF Multi-Band Vertical System Order NOW for delivery this week* (* shipping to USA normally within 48 hours - VK and ZL normally 1 week)
-
Multi-Band Vertical Ham Radio DXers Choice for instant multi-band results across the whole HF spectrum (80m to 10m). This is Callum's favourite antenna which is used daily and on most Friday Livestreams.
IN STOCK AND SHIPPING WORLDWIDE
-
Please send pictures, explain your problem and ask Loki for Replacement Number before ordering loki @ dxcommander.com Important: Do you have an Alloy or Plastic screw cap? They are different poles. See listing below for options.
-
Element Maintenance Kit for DX Commander Antennas
- Standard long length (approx 4m) of Marlow 4mm Shock Cord, as shipped with all antennas
- 20 Fork Connectors
- 20 (legacy) Carabiners
- 4 sections of glue-lined heat shrink
-
Amazing HOA friendly HF Antenna under 7m in height. With 40m option (see user guide).
NOW shipping with HCL Ezyclamps AND the Grey UV stable plates
-
Brand New 7m Telescopic Pole (Rapide) with SOLID last section
-
This is the new grey DX Commander CLASSIC Marine-Grade High-Density Polyethylene plate set.
-
Doublet Centre for Ham Radio Antenna Builders.
-
The mount is designed to fit any tow-ball, both the bolt on type – and the swan neck version as shown in the photos. Made from 12mm thick mild steel, 10mm high-tensile steel bolts and Barenco 10mm V bolts and stainless washers.
-
Self-Supporting All Band, HOA friendly HF Antenna under 7m in height. With 40m option (see user guide).
NO TUNER REQUIRED Shipping with HCL Ezyclamps, the Grey UV stable plates & Alloy Screw Base
-
DX Commander 10m CLASSIC Conversion Kit
When ordering, please tell us if you have a plastic base screw cap - or an alloy screw cap
-
Ground Post for fiberglass vertical antennas This tubing is made via a pultrusion process. They have a high glass content, no carbon, extremely strong and flexible - perfect mechanical properties for antennas.
-
Expedition Plate Set
When ordering, please tell us if you have a plastic base screw cap - or an alloy screw cap
-
DX Commander Signature 9m Self-supporting Vertical Antenna Telescopic Pole. Requires a fiberglass or thin-walled alloy 38mm Ground Post (required some minor flexibility) for free-standing without guying.
-
DX Commander Classic Accessories Box
-
Sale!
-
-
This is an extremely large antenna kit covering 80m and 60m right through the HF spectrum down to 12m and 10m. It is probably NOT your first antenna and is possibly more suitable for DX hunters on the low bands.
-
DX Commander Signature 12.4m Telescopic Pole with full HCL Hex Stay-Up kit
- Stiffer Walls
- Heavier weight (by 20%)
- Custom Screw Base
- Longer when extended