The ultimate no-tangle Antenna Wire.
100m DX10 Antenna Wire
Legendary Mil Spec DX10 Arctic Grade (Type 8) antenna wire, tested by M0MCX, key-down at 1600W for 65 seconds at 14MHz.
For FT8 and other continuous duty modes above 21MHz, suggest max key-down power of circa 500W to avoid stress and heat build up at the end of the element alternatively, you can “QRO” the end of your wire by making a closed loop and soldering the end back on to itself (see user guide).
Overview: 24/0.20mm PCW, Single Core, Arctic Grade Military PVC insulated
Conductors: 0.75mm2 (24/0.2mm) annealed copper.
Insulation: Arctic Grade (Type 8) PVC, 0.65mm nominal thickness to give 2.44 nominal diameter.
Temperature rating: -40 degrees C to + 70 degrees C.
Voltage Rating: 300/500V
Nominal weight: 15kg per km
RDC: 26 ohm per km @ 20 degrees C.
This listing is for 1 x 100m factory spool of this special soft PVC insulated stranded wire.
Ships as a single factory wound and boxed reel of 1 x 100m run.
Each 100m run will allow you to build your elements and still have enough wire to give you plenty of 3.5m long radials.
(Cat number 6X631)