-
The mount is designed to fit any tow-ball, both the bolt on type – and the swan neck version as shown in the photos. Made from 12mm thick mild steel, 10mm high-tensile steel bolts and Barenco 10mm V bolts and stainless washers. -
NEW!! 2024 Colour Change to reflect same as Expedition. Still with grey plates but now cool military brown/green colour. In the box: 4 x 7mDXC Poles (only). Build a quad, 4-square or maybe an experimental phased array. Legendary DX Commander in quality, just a smaller version of its big brother, the 10m DX Commander and delivers you just under 7m in height. -
British Army Antenna Wire with Kevlar Core THIS IS PURCHASED BY THE METRE eg 10 = 10 metresIf you want more than 150m, please contact us first
-
DX Commander Classic Accessories Box -
DX Commander 10m CLASSIC Conversion KitWhen ordering, please tell us if you have a plastic base screw cap - or an alloy screw cap
-
The ultimate no-tangle DX10 Antenna Wire as supplied in all kits for DX Commander. -
Vertical Antenna Biodegradable Radial Pin Kit - Pins Radials down to soft ground fast and safe -
DX Commander Rapide Accessories Box -
Brand New DX Commander Expedition Telescopic Pole -
Brand New 7m Telescopic Pole (Rapide) with SOLID last section -
Original, Brand New 10m DX Commander Classic Telescopic Pole with protective shipping plastic bag -
Doublet Centre for Ham Radio Antenna Builders. -
Multi-Band Vertical Ham Radio DXers Choice for instant multi-band results across the whole HF spectrum (80m to 10m). This is Callum's favourite antenna which is used daily and on most Friday Livestreams.IN STOCK AND SHIPPING WORLDWIDE
-
Element Maintenance Kit for DX Commander Antennas- Standard long length (approx 4m) of Marlow 4mm Shock Cord, as shipped with all antennas
- 20 Fork Connectors
- 20 (legacy) Carabiners
- 4 sections of glue-lined heat shrink
-
-
EzyClamps are made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won't crack the pole and can be tightened fully.- Screw Type – 8mm Hex
- Max Torque – 2.0Nm
- Band Width – 12.7mm – 0.50inch
- Operating Temperature – Max Long term Temp 125°C (255°F) – Occasional Peak Temp 150°C (302°F)
- PA66 (Nylon 6.6.)
-
These are DX Commander's extra large version of the EzyClamps, made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won’t crack the pole and can be tightened fully. -
EzyClamps are made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won't crack the pole and can be tightened fully.- Screw Type – 8mm Hex
- Max Torque – 2.0Nm
- Band Width – 12.7mm – 0.50inch
- Operating Temperature – Max Long term Temp 125°C (255°F) – Occasional Peak Temp 150°C (302°F)
- PA66 (Nylon 6.6.)
-
Mastrant 3mm Guy Line- Safe working load:- 60Kg
- Breaking strength:- 200Kg
- Elongation working:- 2.4 %
- Weight:- 0.5 Kg/100 m
-
550 Paracord, stranded with woven polyester sheath- Safe working load 50kg
- Breaking strain - normally around 200kg
-
In Stock and Shipping Now
The Signature 9 builds on the success of both the Classic and the Signature 12.4, creating a new heavy-duty free-standing guyless DX Commander. -
-
Self-Supporting All Band, HOA friendly HF Antenna under 7m in height. With 40m option (see user guide).NO TUNER REQUIRED Shipping with HCL Ezyclamps, the Grey UV stable plates & Alloy Screw Base
-
2mm thick DX Commander 2024 Classic Alloy Cap Classic Ground Plate Includes insulating clip