-
The ultimate no-tangle DX10 Antenna Wire as supplied in all kits for DX Commander. -
Brand New DX Commander Expedition Telescopic Pole -
550 Paracord, stranded with woven polyester sheath- Safe working load 50kg
- Breaking strain - normally around 200kg
-
Original, Brand New 10m DX Commander Classic Telescopic Pole with protective shipping plastic bag -
-
-
2mm thick DX Commander 2024 Classic Alloy Cap Classic Ground Plate Includes insulating clip -
DX Commander Expedition Portable Ham Radio Antenna 40m - 6m NO ATU -
As supplied on the 18m Nebula. 2mm Mastrant Guy Line for any DX Commander owner wishing to upgrade guy lines from regular paracord.- Safe working load:- 30Kg
- Breaking strength:- 100Kg
- Elongation working:- 2.4 %
- Weight:- 0.2 Kg/100 m
-
-
Mastrant 3mm Guy Line- Safe working load:- 60Kg
- Breaking strength:- 200Kg
- Elongation working:- 2.4 %
- Weight:- 0.5 Kg/100 m
-
Brand New 4 Classic DX Commander Poles (bulk order) -
Ham Radio 40m Trianglular Array or Vertical Yagi Kit
-
-
Doublet Centre for Ham Radio Antenna Builders. -
EzyClamps are made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won't crack the pole and can be tightened fully.- Screw Type – 8mm Hex
- Max Torque – 2.0Nm
- Band Width – 12.7mm – 0.50inch
- Operating Temperature – Max Long term Temp 125°C (255°F) – Occasional Peak Temp 150°C (302°F)
- PA66 (Nylon 6.6.)
-
EzyClamps are made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won't crack the pole and can be tightened fully.- Screw Type – 8mm Hex
- Max Torque – 2.0Nm
- Band Width – 12.7mm – 0.50inch
- Operating Temperature – Max Long term Temp 125°C (255°F) – Occasional Peak Temp 150°C (302°F)
- PA66 (Nylon 6.6.)
-
These are DX Commander's extra large version of the EzyClamps, made in the UK by HCL, they are by far the best clamp we have discovered for use with telescopic poles. They won’t crack the pole and can be tightened fully. -
Sale!
-
Brand New 7m Telescopic Pole (Rapide) with SOLID last section -
Vertical Antenna Biodegradable Radial Pin Kit - Pins Radials down to soft ground fast and safe -
Sale!
DX Commander CLASSIC – HF Multi-Band Vertical SystemNow with the full EzyClamp stay up kit AND the GREY marine Spreaders (not white)
-
DX Commander Classic Aluminium Plates -
DX Commander CLASSIC – HF Multi-Band Vertical System -
NEW!! 2024 Colour Change to reflect same as Expedition. Still with grey plates but now cool military brown/green colour. In the box: 4 x 7mDXC Poles (only). Build a quad, 4-square or maybe an experimental phased array. Legendary DX Commander in quality, just a smaller version of its big brother, the 10m DX Commander and delivers you just under 7m in height. -
-
DX Commander Classic Accessories Box -
This is the new grey DX Commander CLASSIC Marine-Grade High-Density Polyethylene plate set. -
DX Commander 10m CLASSIC Conversion KitWhen ordering, please tell us if you have a plastic base screw cap - or an alloy screw cap
-
DX Commander Expedition Accessories Box -
DX Commander Rapide Accessories Box -
Ultimate DX Commander Classic Kit - ideal for Remote Islands or DXpeditions -
British Army Antenna Wire with Kevlar Core THIS IS PURCHASED BY THE METRE eg 10 = 10 metresIf you want more than 150m, please contact us first
-
Element Maintenance Kit for DX Commander Antennas- Standard long length (approx 4m) of Marlow 4mm Shock Cord, as shipped with all antennas
- 20 Fork Connectors
- 20 (legacy) Carabiners
- 4 sections of glue-lined heat shrink
-
Expedition Plate SetWhen ordering, please tell us if you have a plastic base screw cap - or an alloy screw cap
-
The mount is designed to fit any tow-ball, both the bolt on type – and the swan neck version as shown in the photos. Made from 12mm thick mild steel, 10mm high-tensile steel bolts and Barenco 10mm V bolts and stainless washers.